כבל חשמל Limited Edition
AC Power Conditioning Circuitry
The circuitry features a custom magnetic control and passive multistage filtering circuits that provides impedance compensation to effectively attenuate and/or block the effects of EMI/RFI noise interference of a broad frequency range of well below 200KHz up to in excess of 1GHz. The circuit is implemented in such a way that it does not break the current carrying conductors anywhere within the bounds of the input and output connectors of the cord. This technique maintains the current capacity of the cord by minimizing overall DC resistivity, minimizes the potential for internal generated thermal noise, and maintains overall dynamics. The circuitry is protected and shielded within an attractive durable extruded aluminum housing integrated to main body of the power cord located near the power entry point.
The magnetic control circuit, which utilizes a custom configured ferromagnetic material, provides for common mode noise suppression by dynamically changing the high frequency impedance. Thus, causing high frequency noise to be either absorbed and dissipate as small quantities of heat are reflected back to the source depending on frequency and type of noise. The passive multistage filtering circuit is designed for a wide bandwidth attenuation of high frequency noise. At high frequencies the reactance of the filter approaches zero at various frequency points there by lowering the overall high frequency AC impedance, and thus shunting the presence of any high frequency noise.
|Design Goals:||Low Noise and High ULTRA Performance|
|Shielding:||Plated Copper Braid 95% Coverage CONTEGO|
|Gauge (effective):||10 AWG|
|Current Capacity (DC)
|36 A at 105°C|
|15 A with 15 amp IECC / 20 A with 20
|Resistance:||3.07 mΩ/1M per conductor|
|Estimated Break-In Time:||75 Hours|
|Cable Diameter:||1-1/4 Inch|
|Material Treatment:||Triple (3x) Cryomag©|